The Industrial Store can meet all your pipe needs!
High Density Polyethylene Water and Sewer
Meets AWWA C901/C906 ASTM D2239, ASTM D2737, ASTM D3035, F714High Density Polyethylene (HDPE) water pressure pipe for municipal and industrial water transmission systems. This pipe is available for sizes 1/2"- 63" in diameter. Our HDPE pipe is recognized in the industry for its zero leak rate, high performance, and long life expectancy. They may be manufactured with the color striping to identify their application, such as blue stripe for potable water, green stripe for sewer application, and purple stripe for reclaimed water.
High Density Polyethylene Black Gas
Meets ASTM D2513, Meets API 15 LEFor Fuel Gas Use in Multiple Applications for Gas Distribution. Polyethylene gas pipes are the preferred natural gas distribution piping product of choice with over 90% usage in North America today. High density polyethylene gas pipes are lightweight, non-corrosive, available in coil lengths, and easy to install by heat fusion or mechanical fittings. For these reasons, they have been proven and used since the 1960's. Our Black/Yellow Striped High-Density PE3408/3608/4710 gas pipes are suitable for fuel gas use in multiple applications for gas distribution, and oil and gas gathering.
Medium Density Polyethylene Yellow Gas
Meets ASTM D2513 Distribution Piping System Polyethylene gas pipes are the preferred natural gas distribution piping product of choice with over 90% usage in North America today. Polyethylene gas pipes are lightweight, non-corrosive, available in coil lengths, and easy to install by heat fusion or mechanical fittings. For these reasons, they have been proven and used since the 1960's. Our UAC 2000 MDPE yellow gas pipe is suitable for fuel gas use in multiple applications for gas distribution.
High Density Polyethylene Communication Duct
Meets ASTM F2160For Use in Communication, CATV or Power Wire and Cable Applications. JM Eagle's High Density Polyethylene(HDPE) non-pressure rated conduit meets ASTM F2160 that has been heavily promoted by PPI within Industry Standardization. Our HDPE duct offers stress crack resistance, low coefficient of friction for easier installation & high tensile strength which all translates into reliability.
A53 Seamless and Welded Pipe
General DescriptionSpecification A53 covers Seamless and Welded, black and hot-dipped galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Threaded and coupled pipe is available.
Available Sizes:- 1/8" to 10" Welded Grade A
- 2" to 26" Welded Grade B
- 28" to 48" DSAW API
- 1/8" to 24" Seamless Grade B
General Description
Specification A106 covers Seamless Carbon steel nominal wall pipe for high-temperature service, suitable for bending, flanging and similar forming operations. NPS 1 1/2" and under may be either hot finished or cold drawn. NPS 2" and larger shall be hot finished unless otherwise specified. Surface finished standards are outlined in the specification. Unless otherwise specified, pipe is furnished with plain ends. Hot-dipped galvanized pipe is also available.
Available Sizes:- 1/8" to 24" Seamless Grade B
API 5L LINE PIPE
General DescriptionSpecification API 5L covers seamless and welded pipe suitable for use in conveying gas, water, oil, and other liquefied media.
Available Sizes:- 2" to 48" Welded A53 / API 5L
- 2" to 24" Seamless A53 / 106 / API
| GRADE | PRODUCT | SIZE RANGE | WALLS / PRESSURE |
| 304/304L | SEAMLESS | 1/8" to 20" | 10S, 40S, 80S, 120, 160, XXS |
| WELDED | 1/4" to 48" | 10S, 40S, 80S | |
| BUTT-WELD FITTINGS | 1/2" to 24" | 10S, 40S, 80S, 160 | |
| BUTT-WELD FITTINGS* | 1/2" to 12" | 10S, 40S, 80S | |
| FLANGES | 1/2" to 24" | 150#, 300#, 600# | |
| PRESSURE FITTINGS | 1/8" to 4" | 3000# | |
| 150# FITTINGS | 1/8" to 4" | ||
| TUBING | 1/8" to 1/2" | .035, .049, .065 | |
| 316/316L | SEAMLESS | 1/8" to 20" | 10S, 40S, 80S, 120, 160, XXS |
| WELDED | 1/4" to 48" | 10S, 40S, 80S | |
| BUTT-WELD FITTINGS | 1/2" to 24" | 10S, 40S, 80S, 160 | |
| BUTT-WELD FITTINGS* | 1/2" to 12" | 10S, 40S, 80S | |
| FLANGES | 1/2" to 24" | 150#, 300#, 600# | |
| PRESSURE FITTING | S 1/8" to 4" | 3000# | |
| 150# FITTINGS | 1/8" to 4" | ||
| TUBING | 1/8" to 1/2" | .035, .049, .065 | |
| VALVES | 1/2" to 24" | 150#, 300#, 600# |